1 Introduction

The POC tests are to verify whether Sangfor Subscription Cloud Platform can meet the relevant construction requirements of customers.

1.1 Objectives

To verify the following:

1. Sangfor Cloud Platform (SCP) login security and isolation for tenants and administrators.

2. SCP operations capabilities, including management of multi-level accounts, account authentication, and images.

3. SCP advanced features, including aSecurity, Application Center, disaster recovery, etc.

1.2 Key Information

Date and Time
Location
Personnel
Phone Number

1.3 Requirements

1. Before testing, carefully check the feature items to be tested and correspondingly delete the contents that do not need to be tested, and ensure that the testing environments have been prepared.

2. During testing, confirm the testing process and results with the customer one by one, and save the corresponding screenshots.

3. After testing, deliver the overall test report to the relevant personnel.

2 Preparations

2.1 Customer

Item	Description
Server Room	Racks, trays, PDU power supplies, and appropriate network environments to ensure that tests can be performed properly.
Servers	Compliant servers if needed.

2.2 Sangfor

Item	Description
Hardware and Software	Servers, HCI and SCP software, needed templates, and so on. For details, refer to Section 2.3 Hardware and Software List.
Confirmation of Customer’s Environments	Ensure that the customer has prepared the appropriate testing environments and requirements according to the *Environment Checklist*.

2.3 Hardware and Software List (Supplemental Devices)

No.	Type	Model	Use	Number	Remarks
1	Server	W-2205	Hyper-Converged Infrastructure (HCI) Cluster Creation	2	A supplemental device in a storage-computing splitting architecture.
2	USB Flash Drive	8 GB	Disk Installation and Burning	1

3 Environments

3.1 Topology

Four Gigabit Ethernet Layer 2 switches are required to connect six hosts in the following topology. Please connect the management switch to the switch connected to the edge-connected interface so that the management and business network segments can communicate with each other (or multiplex a Gigabit Ethernet switch that supports VLAN segregation and allows access to the management VLAN in the business VLAN).

3.2 IP Address Planning (Modified as Needed)

Please configure the host IP addresses and networks for the tests as follows:

Resource	IP Type	IPs/IP Range	Netmask	Remarks
HCI Cluster 1 (Existing)	Management Interface IP	172.16.200.101-103 255.255.255.0	255.255.255.0	eth0.
	VXLAN IP	10.10.10.1-g10 255.255.255.0	255.255.255.0	eth1-eth2.
	Storage Area Network IP	100.100.100.1-10 255.255.255.0	255.255.255.0	eth3-eth4.
	Elastic IP Pool	172.16.200.201-220 255.255.255.0	255.255.255.0	eth5.
HCI Cluster 2 (Added)	Management Interface IP	172.16.200.111-113 255.255.255.0	255.255.255.0	eth0.
	VXLAN IP	20.20.20.1-10 255.255.255.0	255.255.255.0	eth1-eth2.
	Storage Area Network IP	200.200.200.1-10 255.255.255.0	255.255.255.0	eth3-eth4.
	Elastic IP Pool	172.16.200.221-240 255.255.255.0	255.255.255.0	eth5.
SCC (Deployed on HCI Cluster 2)	Management interface IP	172.16.200.200 255.255.255.0	255.255.255.0
	Shared Service Elastic IP Pool	200.200.20.10-200.200.20.100 255.255.255.0	255.255.255.0	For all resource pools. eth5.
	Shared Service Elastic IP Pool Gateway	200.200.20.1 255.255.255.0	255.255.255.0
	Shared Service IP	200.200.20.1 255.255.255.0	255.255.255.0
	Cloud Security Service Platform Management IP	172.16.200.210 255.255.255.0	255.255.255.0
	Cloud Security Service Platform Service IP	200.200.20.210 255.255.255.0	255.255.255.0
Ethernet Switch	Management Interface IP	172.16.200.105-109 255.255.255.0	255.255.255.0

Network Plane	Aggregation Mode	Switch Interface Type	Load Balancing Mode	VLAN
Management Network	N/A	access	Manual Load Sharing Mode	200
VXLAN Network	Load Based on IP Addresses	access	Manual Load Sharing Mode	201
Business Network	N/A	trunk	Manual Load Sharing Mode	N/A
Storage Area Network	Link Aggregation with Two Switches	access	Manual Load Sharing Mode	202/203

Release Notes